⎝⎛真人博狗⎞⎠

Address: Liaoning (Dandong) Instrument Industry Base
70-29 Wenqing Road (East)
Postcode: 118000
Phone: (0415) 2256153
Fax: (0415) 2255053
Website: sxrlyy.com
Email: china@sxrlyy.com
Contact: Mr. Rong Jiping, General Manager
19904255599
13904255519
QQ: 1509198052

The 3805 series flaw detector is a model that achieves high penetration in portable X-ray flaw detectors. In 2006, our company took the lead in successfully developing the 3505 type flaw detection machine in China. So far, it has ten years of mature production experience, exceeding the technical requirements of the Japanese flaw detection machine. On this basis, after three years of trial production, we have continued to innovate in design innovation, material selection, process improvement, etc., successfully developed the 3805 flaw detector, successfully achieved the purpose of replacing the mainframe with a small machine, which is the first in China. Since its launch in October 2015, it has been well received by users and is the first choice to replace mainframes.


3805 series X-ray flaw detectors have the following advantages over 3505 flaw detectors:
First, the main components of the controller are imported and domestic military grade, and the device parameters do not change with the change of ambient temperature, ensuring that the controller is stable and reliable when running at high power.
Second, the transformer iron core is made of high-quality Japanese iron-nickel alloy material, the material is thinner, the eddy current and hysteresis loss are reduced, and the heat radiation to the transformer high voltage package is small.
3. The high voltage package uses German materials. The secondary wire diameter is thickened in the design to reduce copper loss. The heat is small at the same power to ensure that the high voltage package works stably for a long time in a reasonable temperature range.
4. The X-ray tube adopts metal ceramic X-ray tube, optimizes the structure design of the electron gun, selects the electrode material with low electron sputtering rate, and selects the emission material with strong emission power, which increases the working time of the tube without increasing the temperature and emitting efficiency.
Fifth, strengthen the internal and external cooling systems of the high-voltage generator. The internal cooling system must meet the principles of thermodynamics. The external cooling system ensures large heat capacity and rapid heat dissipation. The heat dissipation effect doubles the working time, and the temperature of the high-voltage generator casing does not increase.

model Portable X-ray flaw detector XXG-3805 XXGH-3805 XXGHZ-3805
Enter power supply Single-phase 50Hz AC 220 ± 10% V
battery capacity 4kvA
Output X-ray tube voltage (peak kVP)
X-ray tube current (average)
High-voltage transformer input voltage fluctuations
210 ~ 380 kVP
5mA
± 1%
210 ~ 380 kVP
5mA
± 1%
210 ~ 380 kVP
5mA
± 1%
control
system
station
Dimensions (length x width x height) 305 × 338 × 145mm
Weight (kg) 9.5
X-ray tube Focal size (mm × mm)
X-ray radiation angle
3.0 × 3.0
40 ° + 5 °
1.5 × 3.4
25 ° × 360 °
1.5 × 3.5
30 ° × 360 °
X-ray generator cooling method
Insulation method
Safe working pressure
Forced air cooling
SF 6 gas insulation
0.36Mpa ~ 0.45 Mpa
Dimensions (length x width x height mm)
Weight (kg)
Φ340 × 750
35
Φ340 × 770
38
Φ340 × 770
38
Maximum penetration thickness Steel plate A3 (mm) 69 65 59
condition 1, focal length 600 mm, exposure time 10 minutes;
2. Tianjin type III film, double-sided lead foil sensitization; sensitivity ≤ 2%;
3. Dark room treatment: 20 ± 2 ℃ temperature, 5 minutes development time, blackness ≥ 1.5.
working environment temperature
Relative humidity
Altitude
-30 ~ + 40 ℃
Not more than 85%
Not higher than 1000 meters
Way of working Program control, work for 10 minutes, rest for 10 minutes.

七乐彩 七乐彩 电子游戏 炸金花