How many people have sighed and carried overweight cables for going out for radiographic testing? How many people have frowned on the use of cables? How many people are doing radiation testing in the wild and are harmed by radiation because of insufficient distance? 诞生了, 射线检测将进入无线新时代! Now, you don't have to worry about these problems any more, because Dandong Ronghua Ray DTX / WF wireless (integrated) X-ray flaw detector is born, and the ray inspection will enter a new era of wireless!
DTX / WF portable Xx-ray flaw detector is a new generation of constant-frequency DTX / WF wireless (integrated) x-ray flaw detector jointly developed by Dandong Ronghua Ray Factory and British and Iranian scientific research teams. Use HMI to connect PLC, radio communication module, DT integrated circuit, various sensors, use input unit (touch screen) to write working parameters or input operation commands, and display the operation results on the screen.
A new generation of constant-frequency DTX / WF type wireless (integrated) x-ray flaw detectors
, which requires a password when starting up, and comes with a generator lock to avoid accidentally opening the high voltage. Programmable milliampere (mA) values in different kilovolts (kV) for higher sensitivity of film images
Each sensor transmits data to the PLC, and diagnoses the temperature value, power supply voltage, and pressure value by itself. The touch screen displays the temperature change in real time. When the temperature of the X-ray tube is too high, the CPU automatically locks the "high voltage on" key. When the temperature drops to a safe range, the high voltage can be turned on instantly. There is no need to work in a 1: 1 manner, and the longest continuous exposure time can reach 6 minutes, which greatly improves the work efficiency. When the generator is exposed, the built-in buzzer will sound an alarm.
Through the touch screen, all working parameters of the equipment (such as the total running time of the machine, the total number of exposures, the total exposure time, the total number of startups, etc.) can be monitored. The information bar will display the working status and fault information of the equipment, and the program can judge the fault location by itself. The touch screen can be connected to an external power source or use a built-in battery.
DTX / WF type wireless (integrated) X-ray flaw detector uses radio communication module to provide absolute safety protection distance. At the same time, the operator no longer has to worry about the inconvenience caused by the pressure drop, power consumption, length, flexibility and weight of the "connection cable" line. No matter indoor or outdoor operation, the communication transmission signal is stable and strong anti-interference.